Selection language
  • Information
  • +373 22-592 930 Tel
  • +373 22-582 913 tel/fax

Banded narrow V-belts

[TU 38 405-51 / 3-3-238-90]

Drive belts and single banded intended for use on grain harvesters "Yenisei" and "Cedar" and other moving  agricultural  machines in a temperate climate.

Banded  V-belts  should consist of a flat rubber-plate and a few (2-6) V-belts (streams) of the same size, svulkanizovannyh in one product. The plate should consist of rubberized polyester or viscose fabrics. Single and banded belts should be made ​​with tightly embedded seam wrapping tissue. Longitudinal seam must be located on the surface of the broken belt or face the working and non-working surface of the belt

Set of V-belts 2-HC-6700 TU 38 105 1998-91  - belt set to work on pulleys with two identical grooves, consisting of narrow section V-belts HC with an estimated length of 6700 mm.

Belt 3 / HB-3750 TU 38 105 1998-91  - Banded Belt with three streams section HB with an estimated length of 3750 mm.

6 / HB-3600-TP-60 TU 38 105 1998-91  - Banded Belt (11 product groups) 6 / HB-3600, working in tropical regions (T) outdoors (1) at a temperature of up to + 60 S.

Commercially produced the following range of belts:

UB (SRV) 1800

UB (SRV) 3750

HC (SRS) 2240

HC (SRS) 5000

UB (SRV) 2240

UB (SRV) 4250

HC (SRS) 2650

HC (SRS) 5600

UB (SRV) 2500

UB (SRV) 5300

HC (SRS) 2800

HC (SRS) 6000

UB (SRV) 2650

UB (SRV) 5500

HC (SRS) 3000

HC (SRS) 6000

UB (SRV) 2800

UB (SRV) 5600

HC (SRS) 3150

HC (SRS) 6700

UB (SRV) 3000

UB (SRV) 6000

HC (SRS) 3350

HC (SRS) 6700

UB (SRV) 3150

HC (SRV) 6700

HC (SRS) 3500

HC (SRS) 7100

UB (SRV) 3350

HC (SRS) 1800

HC (SRS) 3750

HC (SRS) 8500

UB (SRV) 3550

HC (SRS) 2120

HC (SRS) 4250

HC (SRS) 9500

Hours belts sections of UB (SRV, SW (SRS), R / HC (SRS) and R / HB stands for power transmission should be: on litsenzii- at ​​least 400 hours; rezhimah- forced to at least 2.4 million. Cycles . elongation - not more than 1.5%.

The largest difference between the lengths of single components and multi-grooved belts meet in the table:

The estimated length of the belt mm

The greatest difference in length, mm

1800-1900

2

2000-3150

4

3350-4250

5

4500-5000

6

5300-6700

6

7100

8

Example of designation:  2 / In-2650 , where the number of 2 streams, NV - section dimensions, 2650 - the length of the belt.

 


Our partners