Selection language
  • Information
  • +373 22-592 930 Tel
  • +373 22-582 913 tel/fax

V-belts

Fan [GOST 5813-93]

V-belts are designed to transmit motion from the motor shaft to the units of the automobile tractors and combines. 
Depending on the materials used V-belts can be made ​​of two classes: 1 with the cord polyamide, polyester 2-the cord.

1. The layer tension (rubber layer) 
2. elastic layer (rubber) 
3. carrier layer (for V-belts Tension cord kordshnurovoy design) 
4. supporting layer (cloth belt kordtkanevoy frame structure) 
5. a compression layer (rubber member) 
6. wrapper

The temperature range of performance among the ambient air (outside the engine compartment): 
1. For areas with temperate and tropical climates, from -50C to + 60C, subject to preheat the engine before starting at a temperature below minus 30 ° C, the temperature under the hood in the area location of the belt should be no more than 80 ° C. 
2. For areas with cold and very cold climates from + 40C to 60C.

Depending on the ratio of the width and height of the belts are available in two types: I- narrow cross sections, II-normal sections V-belts are composed of a carrier layer based on the cord of man-made fibers, rubber and fabric wrapping.
 


Symbol :  Belt 2kl 1-14h13-1030 GOST5813-93 . Smooth belt 2nd class, type 1, section 14h13, with an estimated width 14mm, height 13mm and a length of 1030mm

The dimensions of the structure of V-belts

The types of straps

The width of the larger base
(mm)

The estimated width of the belt, bp (mm)

Belt height, h (mm)

Circumferential speed (m / s)

The angle of the wedge belt (deg.)

Resource belt

I

10.5

8.5

8

5 - 40

40

110 thousand / km

13

11

10

5 - 40

40

110-90 thousand / km

17

14

13

5 - 40

40

90 thousand / km

15

12.5

9

5 - 35

40

90 thousand / km

17

14

10

5 - 35

40

90 thousand / km

II

19

16

11

5 - 35

40

1400 hours

22

19

12.5

5 - 35

40

1400 hours

25

21

14

5 - 35

40

80 thousand / km

 

Belts wedge height of 10 mm or more, may be issued gear. The dimensions of the teeth should be as stated in the table.

Parameters

Cross-section belts (bp xh) mm

11h10; 14h10; 16h11

14h13; 19h12,5; 21h14

The depth of the groove

4,0 ± 1

5,0 ± 1

The width of the groove

2 to 5

2 to 5

Tooth pitch

8 to 16

8 to 16

 

Dimensions V-belts that are used in the engines of cars and tractors.

Type of strap

Mark engine or machine

1-8,5h8-600

Snowmobile "Lynx"

1-8,5h8-665

Snowmobile "Buran" YAMZ-238EK and 238AK (harvester "Don")

1-8,5h8-833

GAZ-53A. GAZ-53-2, ZMZ-53 UMP-451MG, MP, ED-181T, M-408 ("Moskvich-2138", "Moskvich-2136")

1-8,5h8-850

"Moskvich-412E", "Moskvich-2136" YMZ 236, 238 JAMZ

1-8,5h8-875

M-412E (Moskvich-412IE "," Moskvich-21251 "," Moskvich-2140 "," Moskvich-2137 ")

1-8,5h8-933

"Zaporozhets ZAZ-965", A-01M (T 4A), A-41 (DT-75M)

1-8,5h8-1018

GAZ-21, GAZ-24 "Volga" GAZ-13, GAZ-31 "Chaika" SMD-60 (tractor T-150), MeMZ-963P

1-8,5h8-1030

UFG 451, UFG 4146, Volga-2410, 31029, RAF, Gazelle

1-8,5h8-1120

SMD-23/24, 31/32, Ural-744, Don

1-8,5h8-1235

Washing Machine "Vesta"

1-8,5h8-1250

KAMAZ YAMZ-740, URAL-745

1-8,5h5-1280

D-21 A1, D-120, D-37e, the D-144

 


Our partners